Vendors Market > Crazy Stu Designs

 Crazy Stuís Ultimate Losi DBXL chassis taking pre orders now

(1/2) > >>

Crazy_stu:
Crazy Stuís Ultimate Losi DBXL chassis

The wait is finally over and the chassis is now ready for production and im taking pre-orders.   These chassis may be on a limited run so now is your chance to get one, I will see how these first 20 sell to see if there is going to be anymore made.   Pre-orders must be paid in full and must include postage costs as well.   The price on these chassis will be $250 AUD.  If your interested in one let me know where your from and I will get you a postage cost.

Crazy Stu's engineering team have worked hard in developing the ultimate chassis for the DBXL, overcoming the stock chassis poor design with specifically resolving the lack of strength and features of the stock Losi chassis.
 
Strength was a serious concern for the team at Crazy Stuís Design and Fabrication, and as you shall see below, there wasn't a single corner cut, or feature not included to ensure this chassis is unparalleled for engineering and strength, the two standout hallmarks of all Crazy Stuís Design and Fabrication.
 
 
 
 
* One-piece aircraft grade 7075-T6 aluminium:
 
Unbeatable chassis strength, perfect for those with heavily modified rigs and anyone wishing to generally preserve the car from extremely common damage to shafts, bearings, gearing mesh, and fuel tank (just to name a few), all due to the large amount of flex of the stock chassis causing serious alignment issues.
 
 
* Longer and wider droop-screw chassis wings:
 
Allows centralisation of the droop screw with more chassis material around it for optimal support, compared to the stock location that leaves the droop screw on the extreme edge of the wing with almost no support.
 
 
* Increase in chassis thickness:
 
Crazy Stu couldn't just stop at increasing just the quality of the chassis material for core strength, we wanted to make this chassis ready to cop some serious punishment and horsepower, so we also increased the chassis thickness from 4mm, to a monster 5mm!
We have also machined only the bare minimum into the chassis to give you more metal for you money!
 
 
* Custom shallow "Crazy Stu" engraving (top and bottom)

*Polished raw finish
 
* Removal of unused 10mm holes in the chassis for increased chassis strength up front where its needed the most.
 
* Adaptation of 5IVE-T engine mount chassis inserts:
 
Perfectly engineered to accept the stock 5IVE-T inserts which will offer the user a perfect gear mesh every time, with the following wide-range of possible pinion/spur combinations to suit any environment, and any engine tune :
 
19/61      19T insert
20/61      20T insert
21/61      21T insert
24/57      20T insert
23/58      20T insert
22/59      20T insert
24/58      21T insert
24/59      22T insert
23/59      21T insert
23/57      19T insert
22/58      19T insert
22/57      18T insert
22/61      22T insert
 
 
* Made and engineered in australia.


You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


Oxy:
Well done Stu. That looks bloody amazing *notworthy*. Good luck with your sales mate I am sure you are going to sell plenty of these chassis. 

Crazy_stu:
Theres only 10 left guys, you had better get in fast

Crazy_stu:
Not long now guys, the chassis are finished, just waiting on a reply email so i can organise the courier to pick them up. Once the courier picks them up they should be arriving on my door in 10 days. Then i will have to test fit each one to make sure that everything fits and works they way it should. Anyway heres some pics.

You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login

rx2_freak:
If I could justify buying a dbxl I would, just to get one of these.

If you have a dbxl, get one of these as I've seen them in person and pics do it no justice. And being stu it'll be able to cop a flogging

Navigation

[0] Message Index

[#] Next page

Go to full version
Powered by Advanced Topic Prefix Pro
Powered by SMFPacks WYSIWYG Editor