Large Scale Downunder Forum


Author Topic:  Spark Plug Wire to Cap  (Read 759 times)

0 Members and 1 Guest are viewing this topic.

Offline NiTROSOXiDETopic starter

  • Trade Count: (0)
  • LSD Newbie
  • *
  • Posts: 22
  • Liked: 13
  • Location: NSW
Spark Plug Wire to Cap
« on: July 25, 2015, 12:59:21 PM »
Hi guys, after some advice, my spark plug wire came out from the plug and i've been reading a few posts here and there about simply screwing the wire back into the cap, is this the correct method ?
From what I can see in the photo I took the wire would need to make a secure connection to the coil but I don't really see how screwing this in would create a secure connection ?

Offline NiTROSOXiDETopic starter

  • Trade Count: (0)
  • LSD Newbie
  • *
  • Posts: 22
  • Liked: 13
  • Location: NSW
Re: Spark Plug Wire to Cap
« Reply #1 on: July 25, 2015, 01:04:48 PM »
This is the pic of the current status

Offline Screamer Designs

  • LSD Contributor
  • Trade Count: (+4)
  • Addicted LSD Member
  • *****
  • Posts: 1407
  • Liked: 1022
  • Previous username : kamipalms
    • Screamer Designs
  • Location: Mandurah WA
Re: Spark Plug Wire to Cap
« Reply #2 on: July 25, 2015, 02:40:04 PM »
You should have one of these hiding inside the spark plug cap

visitors can't see pics , please You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


Pull it out, pierce a new hole through the plug wire with the sharp, pointy end and re fit your cap thumbsup
visitors can't see pics , please You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


You are not allowed to view links. Register or Login

Offline Parky19

  • LSD Contributor
  • Trade Count: (+2)
  • Addicted LSD Member
  • *****
  • Posts: 1768
  • Liked: 2891
  • JAP Racing 'Driven by quality and teamwork'
    • Andrew
    • Geelong R.C. Offroaders Inc.
  • Instagram: DrewParky
  • Location: Geelong Motorsport Complex, Red Lion, Avalon Raceway, Victoria Australia
  • Club: Geelong R.C. Off Roaders Inc. / Red Lion Rebels / Victorian Quarterscale Speedway
Re: Spark Plug Wire to Cap
« Reply #3 on: July 25, 2015, 04:22:55 PM »
Chuck it and put an msd lead on.
visitors can't see pics , please You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login

Geelong R.C. Offroaders Inc. President

Offline NiTROSOXiDETopic starter

  • Trade Count: (0)
  • LSD Newbie
  • *
  • Posts: 22
  • Liked: 13
  • Location: NSW
Re: Spark Plug Wire to Cap
« Reply #4 on: July 25, 2015, 05:26:14 PM »
Thanks mate exactly what I was after. Fired up nicely.

Andrew - Maybe later on mate :)

You are not allowed to view links. Register or Login
You should have one of these hiding inside the spark plug cap

visitors can't see pics , please You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


Pull it out, pierce a new hole through the plug wire with the sharp, pointy end and re fit your cap thumbsup