Large Scale Downunder Forum


Author Topic:  Insanity  (Read 42590 times)

0 Members and 1 Guest are viewing this topic.

Offline Crazy_stuTopic starter

  • LSD Contributor
  • Trade Count: (+37)
  • Addicted LSD Member
  • *****
  • Posts: 1883
  • Liked: 1622
Insanity
« on: June 01, 2013, 08:40:38 PM »
Well i finally bit the bullet and bought a losi.

Ive got big plans for this beast

Over the next few months this thing will be transformed into something fast and big, its not going to be a flash build, just built tough.

Anyway so here it is
You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


Started off buy doing a little mods but the list will grow as it goes on

These are the first things
Savox Steering servo (put the stock steering servo in the throttle servos place)
Super bee kill switch
Twin hyperion life batteries for the RX
Outerwears on crank case and pull start
Full force high flow fuel line setup
990 carb cause i had a spare one laying round.

And this is my first addition to my build
You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login

Darksoul 7075 billet diff case, i could only get one as they dont make them anymore so this will be going in the rear and i will get a different brand one for the front.

visitors can't see pics , please You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


After a Carb, stock or bearing modified or need a carb repaired send me a PM 

Stock 668  $50
Stock 990  $58

Modified 668  $75
Modified 990  $83

10% discount applies for any carb purchased on the 13th of every month.

Full details in the vendors market.

Offline sstokezi

  • LSD Contributor
  • Trade Count: (+20)
  • Addicted LSD Member
  • *****
  • Posts: 1376
  • Liked: 474
Re: Insanity
« Reply #1 on: June 01, 2013, 08:46:27 PM »
Very nice stew what donk are you going to put in it or are you keeping stock

Offline sstokezi

  • LSD Contributor
  • Trade Count: (+20)
  • Addicted LSD Member
  • *****
  • Posts: 1376
  • Liked: 474
Re: Insanity
« Reply #2 on: June 01, 2013, 08:46:59 PM »
Stu not stew

Offline Crazy_stuTopic starter

  • LSD Contributor
  • Trade Count: (+37)
  • Addicted LSD Member
  • *****
  • Posts: 1883
  • Liked: 1622
Re: Insanity
« Reply #3 on: June 01, 2013, 08:52:32 PM »
There is no way im leaving it stock,

Im hoping to put a 70 in it
visitors can't see pics , please You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


After a Carb, stock or bearing modified or need a carb repaired send me a PM 

Stock 668  $50
Stock 990  $58

Modified 668  $75
Modified 990  $83

10% discount applies for any carb purchased on the 13th of every month.

Full details in the vendors market.

Offline sstokezi

  • LSD Contributor
  • Trade Count: (+20)
  • Addicted LSD Member
  • *****
  • Posts: 1376
  • Liked: 474
Re: Insanity
« Reply #4 on: June 01, 2013, 08:55:58 PM »
I knew it wouldn't be stock but had to ask the question

Offline NicholasY

  • LSD Contributor
  • Trade Count: (+1)
  • Jr. LSD Member
  • *****
  • Posts: 77
  • Liked: 31
Re: Insanity
« Reply #5 on: June 01, 2013, 08:56:52 PM »
Looks so pretty straight out of the box.

70 sounds good. If I was starting again that is probably the way I'd go.

I like the thread title. Hope it lives up to the name.

Make sure you get some good driveshafts. I broke two today just running the stock 26cc engine.

Offline Victor1

  • Trade Count: (0)
  • Addicted LSD Member
  • *****
  • Posts: 646
  • Liked: 286
  • "Question everything".But why?
Re: Insanity
« Reply #6 on: June 01, 2013, 08:58:40 PM »
You are not allowed to view links. Register or Login
There is no way im leaving it stock,

Im hoping to put a 70 in it

well you know my thoughts on that.
we will have to wait and see.
IMO a 30.5 is the max

Offline in rod we trust

  • LSD Contributor
  • Trade Count: (+3)
  • Addicted LSD Member
  • *****
  • Posts: 5282
  • Liked: 2482
  • Location: afrika
Re: Insanity
« Reply #7 on: June 01, 2013, 09:21:38 PM »
hello and welcome to the losi crew

Offline NicholasY

  • LSD Contributor
  • Trade Count: (+1)
  • Jr. LSD Member
  • *****
  • Posts: 77
  • Liked: 31
Re: Insanity
« Reply #8 on: June 01, 2013, 11:02:19 PM »
You are not allowed to view links. Register or Login
well you know my thoughts on that.
we will have to wait and see.
IMO a 30.5 is the max

30.5 sounds sensible. Where is the fun in that.

Ridiculously overpowered or nothing I say.

If it doesn't break every time you take it out, then you aren't trying hard enough.

Offline Crazy_stuTopic starter

  • LSD Contributor
  • Trade Count: (+37)
  • Addicted LSD Member
  • *****
  • Posts: 1883
  • Liked: 1622
Re: Insanity
« Reply #9 on: July 13, 2013, 12:16:21 PM »
Some parts arrived for my losi the other day, as soon as this open day is over i will get into some building and some more parts will be on there way, just been pressed for time lately.

DDM heavy duty springs front and rear
Bartolone racing disks
Full force front and rear skid plates
Full force front and rear chassis braces
Team chase steering arm
Team chase chassis
Modified RC front and rear shock towers
Modified RC centre diff cradle
DDM front upper plate
Vertigo monster locker

You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


Got a good start on some parts, cant do much with them though until the next load arrives.

Dont know how long the disks are going to last, i thought they were stainless but they are just alloy.
« Last Edit: July 13, 2013, 12:17:38 PM by Crazy_stu »
visitors can't see pics , please You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


After a Carb, stock or bearing modified or need a carb repaired send me a PM 

Stock 668  $50
Stock 990  $58

Modified 668  $75
Modified 990  $83

10% discount applies for any carb purchased on the 13th of every month.

Full details in the vendors market.

Offline Grim Reaper

  • Global Moderator
  • Trade Count: (+31)
  • Addicted LSD Member
  • *****
  • Posts: 3265
  • Liked: 3557
  • Mick
  • Location: Wherever I may roam
  • Club: Red Lion Rebels
Re: Insanity
« Reply #10 on: July 13, 2013, 04:53:31 PM »
gonna look sick as Stu headbang
visitors can't see pics , please You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login

Offline Crazy_stuTopic starter

  • LSD Contributor
  • Trade Count: (+37)
  • Addicted LSD Member
  • *****
  • Posts: 1883
  • Liked: 1622
Re: Insanity
« Reply #11 on: August 11, 2013, 08:53:05 PM »
Did some more work on my losi today.  Its going to take a while to piece it all together as im strapped for time and funds.

heres some pics

You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login
visitors can't see pics , please You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


After a Carb, stock or bearing modified or need a carb repaired send me a PM 

Stock 668  $50
Stock 990  $58

Modified 668  $75
Modified 990  $83

10% discount applies for any carb purchased on the 13th of every month.

Full details in the vendors market.

Offline Grim Reaper

  • Global Moderator
  • Trade Count: (+31)
  • Addicted LSD Member
  • *****
  • Posts: 3265
  • Liked: 3557
  • Mick
  • Location: Wherever I may roam
  • Club: Red Lion Rebels
Re: Insanity
« Reply #12 on: August 11, 2013, 08:54:10 PM »
Slowly but sure wins the race Stu thumbsup
visitors can't see pics , please You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login

Offline Godles

  • LSD Contributor
  • Trade Count: (+9)
  • Addicted LSD Member
  • *****
  • Posts: 3777
  • Liked: 2167
  • Luke
  • Location: SOR, Perth, WA
Re: Insanity
« Reply #13 on: August 11, 2013, 09:03:05 PM »
I can definitely relate,  I started mine last October and I am only just now getting close to finishing.

I stocked up on parts for ages

Sent from my Samsung Note 10.1

visitors can't see pics , please You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login

Offline elma fudd

  • LSD Contributor
  • Trade Count: (+4)
  • Addicted LSD Member
  • *****
  • Posts: 3037
  • Liked: 2038
    • Dave
  • Location: DEATH STAR
  • Club: QORLS
Re: Insanity
« Reply #14 on: August 26, 2013, 02:35:51 PM »
Good choice on car and parts Stu.if you need anything just pm me I got a few new savox servo up here
" IF YOUR NOT ELCON YOUR NOT WELCON "

Offline Mr.Leopard

  • LSD Contributor
  • Trade Count: (+2)
  • Addicted LSD Member
  • *****
  • Posts: 1905
  • Liked: 310
  • GGF
Re: Insanity
« Reply #15 on: August 26, 2013, 04:16:26 PM »
great another ricer....dont forget the neons mate *rofl* just kidding

looks good stu...how nice is the suspension straight out of the box ay? feels abit like a virgin, its tight when you stick it in and then its just pleasure on every stroke sooooo smoooooth

Offline ospreyracer

  • LSD Contributor
  • Trade Count: (+3)
  • Addicted LSD Member
  • *****
  • Posts: 766
  • Liked: 375
  • rob
Re: Insanity
« Reply #16 on: August 26, 2013, 05:23:27 PM »
You are not allowed to view links. Register or Login
great another ricer....dont forget the neons mate *rofl* just kidding

looks good stu...how nice is the suspension straight out of the box ay? feels abit like a virgin, its tight when you stick it in and then its just pleasure on every stroke sooooo smoooooth


Sounds like your talking about your boyfriend again Johnny lol 

On another note looks great so far stu another nice losi build I'm starting to think I am going to have to get myself one soon

Offline Crazy_stuTopic starter

  • LSD Contributor
  • Trade Count: (+37)
  • Addicted LSD Member
  • *****
  • Posts: 1883
  • Liked: 1622
Re: Insanity
« Reply #17 on: September 06, 2013, 08:23:11 PM »
Got some more parts for my losi the other day, a big thanks goes out to elma fudd for helping me out with a heap of parts at a price that i couldnt pass up not even in a million years. 

Its getting closer to getting back together, next thing will take me a while to get as its going to cost a bit to build.  The engine and pipe i mean.

anyway these are whats going onto it next.

Savox 0235
Savox 0236
Bartolone cage panels
Losi aluminium servo saver
Losi aluminium Steering knuckles
M3, M4, M5, M6 aluminium anodised nylock nuts
a second set of bartolone disk as i want to run 4

You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login
visitors can't see pics , please You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


After a Carb, stock or bearing modified or need a carb repaired send me a PM 

Stock 668  $50
Stock 990  $58

Modified 668  $75
Modified 990  $83

10% discount applies for any carb purchased on the 13th of every month.

Full details in the vendors market.

Offline SLAYER

  • LSD Contributor
  • Trade Count: (+8)
  • Addicted LSD Member
  • *****
  • Posts: 1548
  • Liked: 2257
Re: Insanity
« Reply #18 on: September 06, 2013, 08:45:28 PM »
She's looking good Stu thumbsup
You still throwing a 7t in here or do her up as a racer?
1beer!
visitors can't see pics , please You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login

Offline simonj

  • LSD Contributor
  • Trade Count: (+3)
  • Addicted LSD Member
  • *****
  • Posts: 792
  • Liked: 408
Re: Insanity
« Reply #19 on: September 26, 2013, 12:27:08 PM »
Looks like its gonna be a sweet rig!

Offline Crazy_stuTopic starter

  • LSD Contributor
  • Trade Count: (+37)
  • Addicted LSD Member
  • *****
  • Posts: 1883
  • Liked: 1622
Re: Insanity
« Reply #20 on: September 26, 2013, 08:29:58 PM »
Its coming along, will get some pics soon enough.

dropped some parts in at the anodisers today so when they get back i will be building.

Ive been up at 4am everyday this week doing some work on it in the garage before work.

ive got to get this engine sorted out, i mean what im going to get to put in it.
visitors can't see pics , please You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


After a Carb, stock or bearing modified or need a carb repaired send me a PM 

Stock 668  $50
Stock 990  $58

Modified 668  $75
Modified 990  $83

10% discount applies for any carb purchased on the 13th of every month.

Full details in the vendors market.

Offline Crazy_stuTopic starter

  • LSD Contributor
  • Trade Count: (+37)
  • Addicted LSD Member
  • *****
  • Posts: 1883
  • Liked: 1622
Re: Insanity
« Reply #21 on: September 27, 2013, 07:56:51 PM »
Ok fellas, heres a sneak peak at my losi, still got a fair way to go but bit by bit it will get there.

You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


visitors can't see pics , please You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


After a Carb, stock or bearing modified or need a carb repaired send me a PM 

Stock 668  $50
Stock 990  $58

Modified 668  $75
Modified 990  $83

10% discount applies for any carb purchased on the 13th of every month.

Full details in the vendors market.

Offline mc5

  • LSD Contributor
  • Trade Count: (+1)
  • Addicted LSD Member
  • *****
  • Posts: 1450
  • Liked: 2167
  • "Donk"
  • Location: GRCOR
  • Club: GRCOR
Re: Insanity
« Reply #22 on: September 27, 2013, 08:00:45 PM »
Looking good stu!
What made ya piss the center locker off?
Ps got mail today cheers thumbsup
visitors can't see pics , please You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


MC5 Uses, abusers and endorses.
"Drewpz droop bump stop screwz"

"Guru's pullstarter thumb screws"

Offline Grim Reaper

  • Global Moderator
  • Trade Count: (+31)
  • Addicted LSD Member
  • *****
  • Posts: 3265
  • Liked: 3557
  • Mick
  • Location: Wherever I may roam
  • Club: Red Lion Rebels
Re: Insanity
« Reply #23 on: September 27, 2013, 08:01:11 PM »
Lookin good Stu thumbsup
visitors can't see pics , please You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login

Offline Crazy_stuTopic starter

  • LSD Contributor
  • Trade Count: (+37)
  • Addicted LSD Member
  • *****
  • Posts: 1883
  • Liked: 1622
Re: Insanity
« Reply #24 on: September 27, 2013, 08:18:54 PM »
You are not allowed to view links. Register or Login
Looking good stu!
What made ya piss the center locker off?
Ps got mail today cheers thumbsup

I will be changing the using both the locker and the centre diff but it will depend on what engine im using and if im racing or bashing.  The car will be getting an engine for bashing and an engine for racing if all goes to plan.
visitors can't see pics , please You are not allowed to view links. Register or Login or You are not allowed to view links. Register or Login


After a Carb, stock or bearing modified or need a carb repaired send me a PM 

Stock 668  $50
Stock 990  $58

Modified 668  $75
Modified 990  $83

10% discount applies for any carb purchased on the 13th of every month.

Full details in the vendors market.